您现在所在的位置:首页 >> 机械设计 >> 文章内容
膜片式离合器的设计   论文
双击自动滚屏 文章来源:   发布者:jsjlw99   发布时间:2009/7/6 13:43:02   阅读:3371
膜片式离合器的设计
摘要离合器装在发动机与变速器之间,汽车从启动到行驶的整个过程中,经常需要使用离合器。它的作用是使发动机与变速器之间能逐渐接合,从而保证汽车平稳起步;暂时切断发动机与变速器之间的联系,以便于换档和减少换档时的冲击;当汽车紧急制动时能起分离作用,防止变速器等传动系统过载,起到一定的保护作用。离合器类似开关,接合或断离动力传递作用,因此,任何形式的汽车都有离合装置,只是形式不同而已。现在,电子技术也进入了离合器系统。一种由控制单元(ECU)控制的离合器已经应用在多款的轿跑车上。
关键词从动盘总成 传动系 膜片弹簧 非线性弹性特性
 
Diaphragm type coupling's design
Abstract: The coupling installs between the engine and the transmission gearbox, the automobile from the start to the travel entire process, needs to use the coupling frequently. Its function is causes between the engine and the transmission gearbox can join gradually, thus guaranteed that the automobile starts steadily; Shuts off between the engine and transmission gearbox's relation temporarily, is advantageous shifts gears and reduces shifts gears the time impact; When automobile emergency brake can play the separation role, prevents transmission systems and so on transmission gearbox to overload, plays certain protective function. The coupling similar switch, the joint or breaks to the power transmission function, therefore, any form's automobile has the engaging and disengaging gear, is only the form is different. Now, the electronic technology also entered the coupling system. One kind the coupling which (ECU) controlled by the control unit already applied on many patterns sedan race car.
Key words: Driven disc unit , Power transmission , Disk spring , Misalignment elastic property
 
 
目 录
一、离合器简介 ……………………………………………………… 3
1.1离合器的功用…………………………………………………… 3
1.2离合器设计要求 ………………………………………………… 4
1.3离合器的分类  ………………………………………………… 4
二、离合器的工作原理及过程    …………………………………  5
2.1离合器的工作原理    ……………………………………………  5

[1] [2] [3] [4]  下一页


【 字体: 打印本页 | 关闭窗口
此论文全套为收费论文。要想获得此全套论文和设计请联系本站客服QQ:31600328 欢迎你的访问!
 本文的地址是: http://www.jsjlw99.cn/Articlenews.asp?id=1823  转载请注明出处!
 您的姓名:
 评论正文:
 验证码:  
 
 [@2024/2/23 11:46:14]
   
 [@2022/12/13 12:39:48]
   
 [@2019/6/17 21:23:50]
   
 [@2019/6/5 1:31:59]
   
 [@2019/5/8 19:08:27]
   
 [@2015/8/3 9:18:28]
   
本类最新文章
机械设计目录 滚筒式抛丸清理机的设计  盐酸分解磷矿装置设计 
普通钻床改造为多轴钻床  减速器锥柱二级传动 论 带式输送机传动装置设计 
设为首页 | 收藏本站 | 过客留言 | 联系我们 | 友情链接 | 原创文章 | RSS订阅 | 管理入口

Copyright @ 2006-2008 Powered By 设计中心工作室  版权所有.
Email:31600328@qq.com QQ: 31600328
鄂ICP备05006890号 本站关键词:计算机毕业论文 计算机毕业设计