您现在所在的位置:首页 >> 机械设计 >> 文章内容
水泥瓦模具设计与制造工艺分析   论文
双击自动滚屏 文章来源:   发布者:jsjlw99   发布时间:2009/7/6 13:51:47   阅读:1959
摘   要
 
S195柴油机加工精度要求高,特别是机体气缸套孔止口深度公差,大跨度等直径同轴孔、平衡轴孔孔径公差,大悬臂气缸孔孔径公差,曲轴孔与气缸孔垂直度,曲轴孔与平衡轴孔、曲轴孔与凸轮轴孔轴心线平行度,气缸套孔止口面与气缸孔轴心线垂直度等的精度要求较高。机体加工中,精镗孔工序的加工质量将直接影响柴油机的功率、油耗、噪声等性能。同时,由于S195柴油机的生产批量较大,因而要求该工序的加工设备具有较高的生产效率和自动化程度。然而,目前国内现有的加工设备都不能很好地满足上述加工质量和生产效率等方面的要求,这在一定程度上制约了S195柴油机的性能保证和生产产量的提高。作者设计的S195柴油机机体三面精镗孔组合机床,是在调研的基础上,吸收了镗床设计的优点,根据具体情况设计、制造而成,如投入生产连续使用,将会获得满意的效果。
 
 
关键词:  组合机床  柴油机 镗削 
 
 
 
 
 
 
 
 
 
 
 

Abstract

 
S195 diesel engine expects machining accuracy much, especially organism air cylinder sets of hole stop mouthfuls of degree of depth public errand, Diameter, shaft hole, balanced shaft hole aperture public errand, such as large span,etc., big cantilever air cylinder hole aperture public errand , The shaft hole of song and air cylinder hole vertical degree, shaft hole of song and balancing the shaft hole, shaft hole of song and shaft hole of cam axis line parallel degree, Air cylinder sets of hole stop and expect relatively much with air cylinder hole axis line precision of vertical degree,etc. the mouth. In the organism is processed, the processing quality of the precise bore hole process will influence the performance, such as power, oil consumption, noise of the diesel engine,etc. directly . Besides, because the production lot of S195 diesel engine is relatively old, require the processing equipment of this process to have higher production efficiency and automatic degree. However, the domestic and existing processing equipment can't well meet the above-mentioned requests for processing the quality and production efficiency,etc. At present, This restrain S195 performance of diesel engine from guaranteed and produces the improvement of the output to a certain extent. Three precise bore holes of organism of S195 diesel engine designed now make up the lathe , it is on the basis of surveying and study, Have absorbed the merit that the boring machine is designed, succeed according to concrete conditions design and manufacture, Such as putting into production using in succession, will obtain the satisfied result .

[1] [2]  下一页


【 字体: 打印本页 | 关闭窗口
此论文全套为收费论文。要想获得此全套论文和设计请联系本站客服QQ:31600328 欢迎你的访问!
 本文的地址是: http://www.jsjlw99.cn/Articlenews.asp?id=1833  转载请注明出处!
 您的姓名:
 评论正文:
 验证码:  
 
 [@2024/1/15 18:31:16]
   
 [@2022/12/6 7:41:06]
   
 [@2019/6/10 0:40:10]
   
 [@2019/6/1 5:22:38]
   
 [@2019/5/22 18:48:13]
   
 [@2019/5/12 23:46:20]
   
 [@2019/5/3 2:21:12]
   
 [@2015/8/1 13:28:32]
   
本类最新文章
机械设计目录 滚筒式抛丸清理机的设计  盐酸分解磷矿装置设计 
普通钻床改造为多轴钻床  减速器锥柱二级传动 论 带式输送机传动装置设计 
设为首页 | 收藏本站 | 过客留言 | 联系我们 | 友情链接 | 原创文章 | RSS订阅 | 管理入口

Copyright @ 2006-2008 Powered By 设计中心工作室  版权所有.
Email:31600328@qq.com QQ: 31600328
鄂ICP备05006890号 本站关键词:计算机毕业论文 计算机毕业设计