您现在所在的位置:首页 >> 机械设计 >> 文章内容
新型组合式选粉机总体及分级部分设计 论文
双击自动滚屏 文章来源:   发布者:jsjlw99   发布时间:2009/7/6 14:04:26   阅读:953
 
新型组合式选粉机从功能上兼具粗粉分离器和选粉机性能,变系统气、料两路走为一路走,实现了简化系统的目的。本设计在机体的分级结构中将涡流分级、惯性分级、离心分级原理学科学地组合在一起,物料在选粉机内不同部位经过了几次不同方式的反复分选、清洗、分离彻底,且从结构上消除了风速梯度,保证了分选区气流场稳定,因而可以达到较高的选粉效率。其自带一组低阻高效旋风收尘器,可将80%的合格成品收集下来,大大减轻了下一级收尘器的处理压力和工作负荷,使系统的运转率更高,投资更省。而且采用下部进风的型式,使系统阻力更小,工艺布置更紧凑。
 
 
关键词:新型组合式选粉机、粗粉分离器、分级
 
 
 
 
 
 
 
 
Abstract
New Combined Separator has Thick Powder Separator simultaneously with Separator performance, changing systematic gas and material from two road into one, and have realized easier systematic purpose. It is designed in organism grade the structural eddy current of lieutenant general grade, inertia grade, centrifugation grade principle subject study land make up together. Stock in Separator different positions have passed the relapse of some of different waives grading, wash, split thorough. It has eliminated the gradient of wind speed just from structure, have guaranteed the grading district site of air current stability and may reach higher choose powder efficiency. Taking a group of low resistance efficient whirlwind receive dust ware. It will qualified finished product of 80% collect , also alleviate next a level receipt dust greatly the handling of ware pressure and working load, make systematic operation rate higher and make fewer investment. Meanwhile, it will enter the type of wind with bottom; so it will make systematic resistance less, technical arrangement more compacter.
 
 
Keywords:  New Combined Separator  Thick Powder Separator  Grade
 
 
 
 
 
 
 
 
目   录
0  前言……………………………………………………………………………… 1                                                    
1  方案论证………………………………………………………………………… 2
1.1  选粉机分类…………………………………………………………………… 2
1.2  各类选粉机的特点…………………………………………………………… 2
 1.3  总体结构方案确定…………………………………………………………… 5
1.4  总体设计参数………………………………………………………………… 8
1.5  方案社会价值………………………………………………………………… 10
2  结构设计………………………………………………………………………… 14
2.1  总体设计……………………………………………………………………… 14
2.2  分级部份结构设计…………………………………………………………… 16
3  结论……………………………………………………………………………… 21
  参考文献………………………………………………………………………… 22
  设计工作小结…………………………………………………………………… 23
  附件清单………………………………………………………………………… 24
 
 
 
注:本资料为参考资料,需要此论文请与本站QQ联系购买。联系QQ:31600328
为防止盗版,本站发布资料与实际资料不符请加QQ获取详细资料后再确定购买。正式论文为通过答辨论文。
【说明】该全套毕业设计作品包括:论文+源代码+程序+开提报告+PPT答辨稿   数据流程图、功能模块图、运行界面图、源代码和程序,另附带有开题报告、论文是Word格式,按计算机毕业论文格式要求书写,适用于计算机专业!
, ,

【 字体: 打印本页 | 关闭窗口
此论文全套为收费论文。要想获得此全套论文和设计请联系本站客服QQ:31600328 欢迎你的访问!
 本文的地址是: http://www.jsjlw99.cn/Articlenews.asp?id=1845  转载请注明出处!
 您的姓名:
 评论正文:
 验证码:  
 
 [@2022/5/11 4:37:43]
   
 [@2019/6/11 3:28:30]
   
 [@2019/6/1 23:24:05]
   
 [@2019/5/23 20:42:04]
   
 [@2019/5/3 20:33:51]
   
 [@2019/4/10 0:30:48]
   
 [@2019/3/11 23:08:44]
   
本类最新文章
机械设计目录 滚筒式抛丸清理机的设计  盐酸分解磷矿装置设计 
普通钻床改造为多轴钻床  减速器锥柱二级传动 论 带式输送机传动装置设计 
设为首页 | 收藏本站 | 过客留言 | 联系我们 | 友情链接 | 原创文章 | RSS订阅 | 管理入口

Copyright @ 2006-2008 Powered By 设计中心工作室  版权所有.
Email:31600328@qq.com QQ: 31600328
鄂ICP备05006890号 本站关键词:计算机毕业论文 计算机毕业设计