您现在所在的位置:首页 >> 机械设计 >> 文章内容
组合机床主轴箱及夹具设计 论文
双击自动滚屏 文章来源:   发布者:jsjlw99   发布时间:2009/7/6 14:36:58   阅读:1706

组合机床主轴箱及夹具设计

 
:根据设计任务书的要求,本设计说明书针对连杆大小头双端面铣削组合机床的设计及专用夹具设计进行说明。主要内容包括组合机床工艺方案的制定、组合机床配置型式的选择、组合机床总体设计以及主轴箱设计。
全文主要包括组合铣床的总体设计和主轴箱设计两部分。机床总体设计主要是在选定工艺方案并确定机床配置形式、结构方案基础上确定“三图一卡”,主轴箱设计根据“三图一卡”,整理编绘出主轴箱原始依据图,重点分析传动系统,经过各种方案的比较,最后确定最优方案。此外,为了提高劳动生产率,降低劳动强度,保证加工质量,需设计专用夹具。
关键词:主轴箱;组合机床;夹具
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Combination Machine Tool Spindle boxes and fixture design
Abstract:According to designs the project description the request,This design instruction booklet carries on the explanation in view of the connecting rod reducing socket double face milling aggregate machine-tool design and the unit clamp design. Main content including aggregate machine-tool craft plan formulation, aggregate machine-tool configuration choice, aggregate machine-tool system design as well as headstock design.
The full text mainly includes combines the milling machine the system design and the headstock designs two parts. The engine bed system design mainly is in the designation craft plan and the determination engine bed disposition form, in the structure plan foundation determined "a three charts card", the headstock design basis "a three charts card", reorganizes the compilation to leave the headstock primitive basis chart, the key analysis transmission system, passes through each kind of plan comparison, finally determines the most superior plan. In addition, in order to enhance the labor productivity, reduces the labor intensity, guaranteed the processing quality, must design the unit clamp.
Keywordheadstock ;aggregate machine-tool;jig
 
 
 
 
 
 
 
 
 
 
 
 
 
目 录
 
第一章 绪 论………………………………………………………………………1
1.1 组合机床的特点………………………………………………………………1

[1] [2]  下一页


【 字体: 打印本页 | 关闭窗口
此论文全套为收费论文。要想获得此全套论文和设计请联系本站客服QQ:31600328 欢迎你的访问!
 本文的地址是: http://www.jsjlw99.cn/Articlenews.asp?id=1853  转载请注明出处!
 您的姓名:
 评论正文:
 验证码:  
 
 [@2019/5/26 15:43:09]
   
 [@2019/5/16 13:26:34]
   
 [@2019/5/6 15:11:42]
   
 [@2019/4/25 23:33:24]
   
 [@2019/3/31 3:46:49]
   
 [@2019/3/18 17:52:35]
   
 [@2015/8/5 6:03:47]
   
 [@2015/8/3 0:46:29]
   
本类最新文章
机械设计目录 滚筒式抛丸清理机的设计  盐酸分解磷矿装置设计 
普通钻床改造为多轴钻床  减速器锥柱二级传动 论 带式输送机传动装置设计 
设为首页 | 收藏本站 | 过客留言 | 联系我们 | 友情链接 | 原创文章 | RSS订阅 | 管理入口

Copyright @ 2006-2008 Powered By 设计中心工作室  版权所有.
Email:31600328@qq.com QQ: 31600328
鄂ICP备05006890号 本站关键词:计算机毕业论文 计算机毕业设计